Debut Low Cut 2430

DEBUT LOW CUT 2430

Jackson Debut Fusion Low Cut 2430 White Figure Skate

GET LOW

For all skaters seeking greater flexibility, including Dance & Synchro skaters, the Debut Low Cut design is based on our successful Debut 2550 pattern with a lower back height and soft, rolled collar for comfort on Achilles tendons

The Debut Low Cut 2430 Boots feature:

fs2430_beauty__PID:4ba477f8-495e-47cb-96b6-2d631294d97e

The Debut Low Cut 2430 is built with a 45 Support Rating.

GET LOW

FS2430 Bullets.jpg__PID:30c5c52f-0753-4c5a-b866-448a1a52c60c

a. Asymmetrical interior ankle pads wrap anatomically around the foot for customized fit and comfort

b. Ankle punch outs that are molded into the design

c. Split leather reinforcements are alternated with Jackson’s Heat Moldable materials to provide better support and strength while remaining fully heat moldable; customization in minutes!

d. Increased wrap over instep for better fit, control & security. Combined with the Jackson Flex Notch, the boot remains wrapped tight around the lower leg/ankle for unmatched support!

e. Specially designed covered tongue with soft top-line for improved comfort & air flow

f. Non-abrasive fabric lining makes initial fit soft & comfortable

g. Soft collar & u-shaped cuff allows for maximum flexibility without losing support

h. Lightweight & cut resistant microfiber upper with DuraGuard for added protection & durability

FS2430 Bullets 2.jpg__PID:7130c5c5-2f07-438c-9a78-66448a1a52c6

The Fusion Sole is constructed from lightweight nylon composite, which is torque resistant and waterproof. A rubber inlay provides non-slip blade mount and superior shock absorption.

Leather Carbon Fiber (LCF) sole is 15% lighter than traditional leather Leather Cork Composite (LCL) soles. They also are water & torque resistant and the bottom rubber layer provides non-slip blade mount.

SHOCK ABSORPTION AT ITS FINEST

Each 2000 Series Boot comes standard with our new ProForm Insole.
Designed around premium shock absorption, ProForm Insoles are constructed from Poron throughout the entire footbed.

ProForm Insole Back Both.jpg__PID:565f0e4b-4d24-48c6-adb0-87cd8c075281

The EVA base layer cushions provide a stable platform and there is an extra Poron heel insert for additional shock absorption on landings. A supportive arch and final touch of a non-stick cover provides easy fitting.

ProForm Insole Inside Right.jpg__PID:ad565f0e-4b4d-44c8-86ed-b087cd8c0752

ProForm Insole Back Right.jpg__PID:2530ad56-5f0e-4b4d-a4c8-c6edb087cd8c

ProForm Insole Bottom Inside Right.jpg__PID:30ad565f-0e4b-4d24-88c6-edb087cd8c07

fs2430outside__PID:005f57b5-b8c0-4af8-b6dd-4fb03f5abe43

The Fusion Sole is constructed from lightweight nylon composite, which is torque resistant and waterproof. A rubber inlay provides non-slip blade mount and superior shock absorption.

fs2430_bottom__PID:00ee515a-c1b0-42f2-805e-bcbef3b88480

The Entre 2340/41 is available in the following sizes:

Sizes: Women's 3 - 10
Widths: R (A/B) & W (C/D)

Custom options available, contact your local dealer for more.